How to Extend the Life of Your Nanit Breathing Wear with Proper Care

Your Nanit Breathing Wear does double duty: it keeps your baby comfortable and lets the monitor track breathing patterns. But that special fabric and embedded sensor grid need a little more attention than regular pajamas. With the right care, pieces like the Breathing Wear Sleeping Bag or Cammies can stay accurate and soft through many washes.

In this guide, you’ll find straightforward steps for washing, drying, and storing your Nanit breathing wear. No harsh chemicals, no guesswork—just practical habits that help your investment last.

Washing Your Nanit Breathing Wear: What Works and What to Avoid

Always check the care tag first, but here’s the general rule: machine wash cold on a gentle cycle. Use a mild, fragrance-free detergent—skip bleach, fabric softener, and dryer sheets. Those additives can coat the fabric and interfere with the breathing sensor’s ability to read movement through the material. For the Breathing Wear Pajamas or Cammies, turning them inside out before washing helps protect the outer print and reduces pilling.

If you’re dealing with a stubborn stain, spot-treat with a tiny amount of gentle detergent and let it sit for five minutes before washing. Avoid soaking or scrubbing the chest area where the sensor pattern is printed. For the Breathing Wear Sleeping Bag, which is larger, make sure it’s not twisted or bunched in the machine so it rinses evenly.

• Use cold water and a gentle cycle every time.
• Skip bleach, fabric softener, and dryer sheets entirely.
• Turn garments inside out to protect prints and reduce wear.

Drying: The Step That Makes or Breaks Longevity

Heat is the biggest enemy of the sensor-printed fabric. High heat can cause the printed pattern to crack, peel, or lose its ability to be read by the Nanit camera. The safest method is air drying: lay the Breathing Wear flat on a clean towel or hang it on a drying rack away from direct sunlight. If you’re in a hurry, you can tumble dry on the lowest heat setting (no-heat air fluff is even better) and remove the garment while it’s still slightly damp.

Never iron the chest area or use a steam iron anywhere on the fabric. The sensor pattern is printed with a special ink that can degrade under direct heat. For the Cammies 4-Pack, which you might rotate frequently, having a few pieces on hand means you can air dry one set while using another—no need to rush the drying process.

• Air dry flat or hang to preserve the sensor print.
• If using a dryer, choose the lowest heat or no-heat setting.
• Never iron the chest area or use steam on the fabric.

Storage and Rotation Tips to Keep Breathing Wear in Rotation

Store your Nanit breathing wear in a cool, dry drawer away from direct sunlight. UV rays can fade the print and weaken the fabric over time. If you live in a humid climate, consider adding a silica gel packet to the drawer to prevent musty smells—just keep it away from baby’s reach. Fold the garments loosely rather than hanging them, as hanging can stretch out the neckline and shoulder seams.

Rotating between two or three pieces—like the Breathing Wear Sleeping Bag for naps and Cammies for nighttime—gives each item time to rest between uses. This reduces the frequency of washing and helps the fabric maintain its shape. When you notice the sensor pattern starting to fade or the fabric feeling thin, it’s probably time to replace that piece to keep breathing tracking accurate.

• Store folded in a cool, dry drawer away from sunlight.
• Rotate between multiple pieces to reduce wash frequency.
• Replace when the sensor pattern fades or fabric thins.

A little extra care goes a long way with Nanit Breathing Wear. By washing gently, air drying, and storing smartly, you’ll keep the fabric soft, the sensor pattern readable, and your baby’s sleep tracking reliable for months. Treat these pieces like the specialized gear they are, and they’ll reward you with consistent performance.