How to Assemble the Nanit Wall Mount Elbow Connector and Floor Stand for a Custom Viewing Angle

Quick Answer

Yes, you can combine the Nanit Wall Mount elbow connector with a Floor Stand to create a custom viewing angle, but you need to ensure compatibility and use the right parts. The elbow connector adds tilt and swivel flexibility, while the Floor Stand provides stable placement that slides under the crib. Below is a step-by-step assembly guide with common pitfalls to avoid.

If you own a Nanit Smart Baby Monitor and want more control over the camera angle, combining the Wall Mount elbow connector with a Floor Stand can give you the flexibility you need. While the Wall Mount is designed for above-crib mounting, pairing its elbow with a floor stand lets you position the camera at a custom height and tilt, perfect for nurseries where wall mounting isn't an option.

This guide walks you through assembling the elbow connector and Floor Stand together, covering what you need, how to attach each piece, and how to avoid common mistakes that could lead to a loose or unstable setup.

Understanding the Parts: Wall Mount Elbow Connector and Floor Stand

The Nanit Wall Mount includes an elbow connector that lets you adjust the camera's angle up, down, and sideways. It's typically used to mount the camera securely above the crib, but you can repurpose that same connector to attach the camera to a Floor Stand. The Floor Stand is a practical accessory designed to pair with the Nanit Smart Video Baby Monitor, offering stable and flexible placement by sliding under cribs.

Before you start, ensure you have both the Wall Mount (which includes the elbow connector) and a compatible Floor Stand. The Nanit Floor Stand (catalog price $50) is designed to pair with the monitor and slides under cribs for a space-saving setup. Note that the Floor Stand Replacement Part (catalog price $12.50) is only an extension segment and won't work as a standalone base.

• Check that your Floor Stand is the full version, not just the extension segment.
• The elbow connector is part of the Wall Mount kit; ensure you have the complete set.

Step-by-Step Assembly: Connecting the Elbow Connector to the Floor Stand

Start by assembling the Floor Stand according to its instructions, making sure the base is stable and the pole is fully extended to your desired height. Then, locate the elbow connector from the Wall Mount kit. It should have a socket that fits the top of the Floor Stand pole. Align the connector's opening with the pole and push it down firmly until it clicks or locks into place.

Once the elbow is attached, you can adjust the camera's tilt and swivel by loosening the adjustment ring, positioning the camera, and tightening it back up. Make sure the connection between the elbow and the pole is snug to prevent any wobble. A common mistake is not fully securing the connector, which can cause the camera to droop over time.

• Use the provided screws or clamps to secure the elbow if your model includes them.

Testing the Custom Viewing Angle

After assembly, test the viewing angle by checking the camera's live feed on the Nanit app. The elbow connector allows for a wide range of tilt and swivel, so you can aim it directly at the crib or cover a larger play area. Adjust the camera until you get the desired field of view, making sure the entire sleep space is visible.

This setup is particularly useful for travel or as a secondary monitor for in-home play spaces, as the floor stand is easy to move. Keep in mind that the elbow connector's range is limited, so you may need to reposition the floor stand itself to achieve the perfect angle. If the camera still doesn't cover the area, consider using the Flex Stand as an alternative.

• Check the app's live view to fine-tune the angle before securing the final position.

Assembly Steps at a Glance

1. Attach the elbow connector to the floor stand: Align the elbow connector's socket with the top of the floor stand pole and push down until it locks securely. Check for any wobble before proceeding. A loose fit here will cause the camera to droop.
2. Secure the monitor to the elbow connector: Mount the Nanit camera onto the elbow connector's mount plate, ensuring it clicks into place. Tighten any screws or knobs to hold the camera firmly. Double-check that the camera is locked before adjusting the angle.
3. Adjust and test the viewing angle: Loosen the elbow's adjustment ring, tilt the camera to your desired position, and retighten. Use the live view in the Nanit app to verify the full sleep space is visible. Reposition the floor stand if the angle isn't quite right.

Product Details You Need to Know

• Wall Mount: Pairs with the Nanit Smart Video Baby Monitor and securely fastens above the crib for wide-angle views of the entire sleep space. The elbow connector from the Wall Mount is the key to adjusting the camera's angle when used with a floor stand.
• Floor Stand: The Nanit Floor Stand is a practical accessory designed to pair with the Nanit Smart Video Baby Monitor. It offers a stable and flexible placement solution by sliding easily under cribs, helping to keep the monitor securely positioned while saving space in the nursery. This floor stand provides the stable base you need when combining it with the elbow connector for a custom viewing angle.

Combining the Nanit Wall Mount elbow connector with a Floor Stand is a smart way to get a custom viewing angle when wall mounting isn't practical. Follow the steps above to ensure a secure and stable setup, and test the angle with the app for the best coverage of your baby's sleep space.