How to Mount Your Nanit Monitor on the Wall Safely

Mounting your Nanit baby monitor on the wall is one of the best ways to get a clear, unobstructed view of your baby's crib while keeping cords and the camera out of reach. A wall-mounted setup also frees up floor space and reduces the risk of the monitor being knocked over. Whether you're using the Nanit Smart Baby Monitor + Flex Stand or adding a permanent mount, the process is straightforward if you follow a few key steps.

In this guide, we'll walk through the tools you'll need, how to choose the right location, and the installation steps to ensure your Nanit stays securely attached. We'll also cover common mistakes to avoid and how to check that everything is safe before you rely on the mount.

What You'll Need for the Installation

Before you start, gather the necessary tools and hardware. The Nanit Wall Mount Elbow Connector is designed specifically for the Nanit camera and includes the mounting plate and screws. You'll also need a drill with a masonry or wood bit (depending on your wall type), a level, a pencil, and a screwdriver. If you're mounting into drywall, use wall anchors (often included) to ensure a secure hold. For concrete or brick, use appropriate masonry anchors.

If you haven't purchased the wall mount yet, the Wall Mount Elbow Connector is sold separately from the monitor. It allows you to angle the camera for the best view of the crib. Some users also prefer the Flex Stand for a non-permanent option, but for a fixed, out-of-reach setup, the wall mount is the safest choice.

• Nanit Wall Mount Elbow Connector (includes mounting plate and screws)
• Drill with appropriate bit for your wall type
• Level and pencil for marking
• Wall anchors if mounting into drywall

Choosing the Right Location

The ideal spot for your Nanit is directly above the crib, centered along the longest side. This gives you a full view of the sleeping area and allows the Breathing Wear technology to track your baby's breathing patterns accurately. The camera should be mounted 6 to 8 feet above the floor, angled downward toward the crib. Make sure the mount is at least 12 inches away from any corner or obstruction to avoid a blocked view.

Avoid placing the mount near windows, heating vents, or direct sunlight, as these can affect the camera's night vision and temperature readings. Also, ensure the power cord can reach an outlet without stretching. If you're using the Nanit Power Adapter, check that the cord is long enough for your chosen location. A neat cord path also reduces tripping hazards.

• Center the mount above the longest side of the crib for best coverage.
• Mount 6–8 feet high for optimal angle and breathing tracking.
• Keep away from windows, vents, and direct light.

Step-by-Step Mounting Process

Start by holding the mounting plate against the wall at your chosen location. Use a level to make sure it's straight, then mark the screw holes with a pencil. Drill pilot holes at the marked spots, then insert wall anchors if needed. Screw the mounting plate into the wall using the provided screws, but don't overtighten—just snug is fine. Attach the elbow connector to the plate, then slide the Nanit camera onto the connector until it clicks into place.

Once the monitor is mounted, plug in the power cord and route it along the wall using cord clips (not included) to keep it tidy. Open the Nanit app and follow the on-screen instructions to adjust the camera angle. Use the app's live view to fine-tune the tilt and pan so the crib fills the frame. Finally, test the mount by gently tugging the camera to ensure it's secure. Do this before you rely on the setup overnight.

• Use a level to ensure the mounting plate is straight.
• Drill pilot holes and insert anchors for drywall.
• Attach the elbow connector, then snap the camera into place.
• Adjust the angle in the app for the perfect view.

Safety Checks and Common Mistakes

After installation, double-check that the mount is secure and the camera cannot be pulled down by a curious toddler. The cord should be out of reach—use cord covers or route it behind furniture. Never place the monitor or its cords within the crib or within arm's reach of the baby. The Nanit Breathing Wear Quilted Sleeping Bag and other breathing wear are designed to work with the camera, but the mount itself must be safely out of the crib zone.

Common mistakes include mounting too low (under 6 feet), which can cause the camera to be knocked or the view to be blocked. Another is using the wrong anchors for your wall type—drywall requires anchors, while wood studs can take screws directly. Also, avoid running the cord across walkways or under rugs, as this creates a tripping hazard. If you're unsure about the wall type, consult a professional or use a stud finder.

• Ensure the camera and cord are out of baby's reach.
• Use the correct anchors for your wall type.
• Avoid mounting below 6 feet or near crib edges.

Mounting your Nanit monitor on the wall is a simple DIY project that improves safety and camera performance. By choosing the right location, using the proper hardware, and following the steps above, you'll have a secure setup that gives you peace of mind. For a portable alternative, the Flex Stand is a great option, but for a permanent, safe installation, the wall mount is the way to go. Always double-check your work and enjoy the clear view of your little one.